Innovative tools - Secure Checkout - Colour matching - FREE shipping over $199
Your cart is currently empty
To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm) wide bias strip of lightweight fabric, or use packaged narrow double-fold Bias Binding. Straight stitch, length 2.5, or zigzag or
decorative stitch at the desired length.
To bind edges with 1/4" (6 mm) Bias Binding, cut a 1" (24 mm) wide bias strip of lightweight fabric, or use packaged narrow double-fold Bias Binding. Straight stitch, length 2.5, or zigzag or
decorative stitch at the desired length.
1. Snap-on Bias Binder.
2. Cut the end of the bias tape to a point. Insert the bias tape from the outside of the funnel
guide, into the slot and pull it down under the foot.
3. Place the edge to be bound into the groove on the left side of the funnel guide.
4. Adjust needle position as needed or to adjust the position of the binder funnel/guide, loosen
the screw on the top of the foot and position the funnel guide as needed.